Fotoğraf ve Video Aksesuarları
- Lens Adaptörleri
Oyun Aksesuarları
- Kontrolcüler
Fotoğraf ve Video Aksesuarları
Oyun Aksesuarları
₺ 4,113.68
When putting on the stand,auto-sense scanning mode ON;when holding on hand,barcode scanner is switched to manual trigger mode.No need to scan any setup code like normal barcode scanner.
Introductions:
NA-2030 is a 1D/2D 2.4GHz wireless Bluetooth USB wired 3-in-1 barcode scanner with stand. It can accurately and quickly recognize 1D/2D printed and screen codes. It has 3 scanning modes, including self-sensing mode and continuous scanning mode.It also has a storage function with 16MB of storage space that allows it to store up to 50K barcode data. 1800mA*H rechargeable battery allows it to last for 24 hours of operation.
If you need to know more, please continue to check below.
Normal barcode scanner’s wireless dongle only receive data from one barcode scanner,but wireless dongle of MJ-4590DB-A can receive data from multiple MJ-4590DB-A barcode scanners at same time.
Notes:Max is 8pcs MJ-4590DB-A barcode scanners to One wireless dongle.
Upload data instantly mode:Uploading every data to your device after every succesful scanning.
Storage mode:Storing data into scanner’s memory after successful scannings,then uploading datas by scanning setting code”Upload Data”in the user manual.
16MB memory space can store up to 50K+ barcodes data.
Notes:
When users find that scanner can not transfer data to their device after one successful scanning on 2.4GHz wireless connection,it may be on storage mode.
1.Manual trigger mode:Pressing button to scan codes
2.Continuous mode:Scanner’s scan light is always on to scan codes
3.Automatic sensing mode:Scanner will scan automatically when a code get closed to its scan window(No need to scan any setup code,put on stand,auto-sense scanning mode ON)
We have 3 setting codes for exchanging scanning modes,please check the picture.
Bookmark the image, and when you need to change the scanning mode,scanning the corresponding setting code in the image above.
1800mA*H capacity & rechargeable & lithium battery
Continue working time: 24 hours
Charging time: 3.5 hours
Standby time: 60 days
Four green lights shows battery power level:
4 lights ON: Full power
3 lights ON: 75% power
2 lights ON: 50% power
1 lights ON: 25% power (You need to charge it)
Can be programmed
Add prefix,suffix,and characters in the middle.
Delete characters
Add CR,LF,Tab etc.
Package List:
1 * Barcode Scanner
1 * Stand
1 * User Manual
1 * Wireless Dongle
1 * USB Cable