, , ,

GiGimundo Lk10 Displaylink Docking Station Dual Monitor 4k 60hz For m1/m2/m3 Macbook air/pro, Portable Displaylink Adapter With 3xusb3.2 Port 2xhdmi, 2xdp, pd100w, Ethernet Audio Gray

GiGimundo
  • Dual Monitor 4Kp60 Display: Unlock your productivity of Macbook Air M1/M2, Macbook Pro M3 with this multi-screen extender featuring a DisplayLink chip. Get dual 3840x2160P 60Hz video output, a huge improvement for both amateur and professional users. You can also use LK10 for Macbook Pro to output dual 4K 60Hz video, so this way you will have the rest Thunderbolt 4 port to connect more devices such as NAS or additional docking stations to obtain more powerful functions
  • Super Compact and Portable: Made with an aluminum alloy shell, this display link USB C dock is both durable and textured. Smaller than your mac 14pro, it’s lightweight, approachably 5.6 ounces. Easily switch back and forth between the office and home
  • Never Out of Juice: This type-c docking station features an extra USB-C port to support maximum 100 Watts power delivery. Your device will never run out of battery and you won’t need to worry about losing important work due to a power outage
  • Rich Connection IO Ports: With 1xUSB-C PD 100 Watts, 2xHDMI v2.0 4K 60Hz, 2xDP v1.4 4K 60Hz, 3xUSB3.2 Gen2 10 Gbps, 1xRJ45 Gigabit Ethernet, 1×3.5 mm Audio and Microphone Jack, this docking station enables you to promote more peripheral devices and never worry about unstable data flow or power issues
  • Super Fast Transfer Rate: The source input Type-C end supports USB3.2 Gen2, with a bandwidth of up to 10 Gbps, ideal for use with Thunderbolt3/4 of mac computers. The triple USB type-A output ports also feature USB3.2 Gen2, each with a powerful capability of 10 Gbps when transferring data through a single USB port
  • Others: (1).It required additional DisplayLink driver installation. (2).RJ45 wired network 1Gigabit didn’t compatible with wi-fi or BT. (3).Work with most windows laptops those produced in recent years. (4).The 3.5mm audio jack was 4-pole. (5).It didn’t support 3 monitors. (6).It can charge your laptop by-pass thougth with pd via USB-C while in use

 13,305.78


GiGimundo LK10 DisplayLink Adapter – Driver Installation for macOS

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

NOTE: Please download the driver corresponding to the system version. Please check Troubleshooting Guide(PDF) when encountering difficulties.

Warm Tips

  • When installing the driver in the computer system, you need to allow the APP Store and approved developers in mac Computer Preferences, Security and Privacy Settings before the installation can be successful. If you do not allow (or ignore), the image will not appear after the installation is completed, and the installation will be failed when you reinstall. You need to reinstall the mac OS and then follow the DisplayLink driver installation process again.
  • It can be used only after installing the driver, and the driver corresponding to the system must be installed. After the system is upgraded, the driver may also need to be upgraded.
  • LK10 outputs images through USB3.0 and does not output images under the graphics card. Widows computers are in MST mode. When some computers are set to copy mode, mixed mode will appear. When two screens are displayed at the same time, the screen is A+A+B. Some computers can enter the Intel graphics card control center to set the screen to be consistent, but Some computers cannot set it up
  • The smartphone only supports single-display projection with a resolution of 1080@60Hz. It does not support simultaneous display projection, cannot be in DEX mode, and cannot be connected to the Internet. (Smartphone needs to support DP Alt Mode).
  • Does not support iPad screen display, cannot connect to the Internet, and has no sound output when audio jack was plugged in.
  • Under full load conditions, when playing videos and running speeds, there is a chance that the USB flash drive may drop.
  • When DisplayLink screens are connected some protected content may not play. In those cases the video would remain black while audio is still playing. This is due to the behaviour of the OS X interfaces the DisplayLink driver uses to access graphics content. A side effect of those interfaces is that as soon as one DisplayLink screen is connected, protected content becomes unavailable on all screens. A workaround is to temporarily disconnect all DisplayLink screens, switch to another browser or disable hardware acceleration in your browser to access protected content.
  • If your laptop monitor always flickers or the external monitor always goes black, you may need to adjust the monitor’s resolution and refresh rate, follow: Setting – Displays – Add Display – Tick your external monitor – Scaled – Adjust resolution – Show all resolutions – select lower resolutions and done.
  • If you need to frequently unplug the USB-C in order to wake up the external monitor, try updating the DisplayLink driver, or change the lock screen time all the way to Never. Display wake-up time delay of 12~15 seconds.

Other Featured Products from GiGimundo